Like a pair of old sneakers, golf grips wear out. Because of the deterioration, golfers do not get optimal results from their grips. When this occurs, golfers must take off the grips and replace them. Professionals can do the job, but it is much more inexpensive to do it at home.
Removal
Depending on how often a golfer plays and where he lives, replace golf grips at least once every season, according to Golf Equipment Source. You can remove grips in a couple of ways. According to Golf Link, you can use a knife to cut the grip from the shaft up to the end of the club. For those who do not want to cut the grip, applying golf solvent will let the grip slide off the club. From there, use a knife or another sharp object to remove the remaining tape on the shaft.
Tape
Once the club is ready for a new grip, wrap double-sided tape down the shaft length of the grip. Completely cover that part of the club, according to Golf Equipment Source. Peel off the backing on the other side of the tape.
Solvent
After you apply new tape to the shaft, soak it with grip solvent. According to Golf Link, pouring some of the grip solvent on the inside of the new grip helps tremendously. Swirl the grip around, and make sure the tape and grip have enough solvent. To avoid a mess, place a rag or a newspaper underneath the club to catch excess solvent.
New Grip
The club should be ready for the new grip. According to Golf Link, slowly push the new grip onto the shaft toward the head of the club. Pull it as far as it will go down the shaft, so that it is tight at the end. Feel the grip, and test it to see if it feels right. Adjust alignments on the new grip so that it is comfortable to hold. Allow the new grip to dry for a few hours.
Member Comments