The Tech Deck skateboard is a popular toy among young skateboarders. The Tech Deck skateboard has the exact design as the conventional skateboard yet can fit in the palm of your hand. Tech Deck skateboarding has been commonly referred to as "finger-boarding." The finger-boarder uses the index and middle finger to act as the legs of the skateboarder. The Tech Deck corporation produces tiny skateboard parks for finger-boarders to use. The Tech Deck skateboard even comes with a miniature set of tools which help to set up the board.
Step 1
Place the plastic board of the Tech Deck skateboard onto a flat table with the picture on the bottom facing down. Insert eight miniature bolts through the top of the eight holes in Tech Deck board.
Step 2
Hold the Tech Deck board sideways. Place one of the plastic silver trucks onto four of the bolts that stick out from the bottom of the board. Pick up the miniature screwdriver between your thumb and forefinger.
Step 3
Tighten the four small bolts to fasten the silver truck to the bottom of the Tech Deck board. Place the remaining truck onto the other four bolts and repeat the process.
Step 4
Place the Tech Deck skateboard upside down on the table so the picture on the bottom faces up. Insert two small wheels onto each of the tiny silver trucks. Place one small nut over each of the four Tech Deck wheels.
Step 5
Pick up the miniature T-shaped skate tool with your thumb and forefinger. Tighten each of the small nuts with the tip of the skate tool to fasten the Tech Deck wheels to the trucks. Flip the Tech Deck skateboard onto its four wheels.
Step 6
Press down on the top of the newly assembled Tech Deck skateboard to make sure the wheels and trucks have been securely fastened in place.
Member Comments