Maintaining golf clubs is an important task when it comes to insuring their longevity. Golf clubs can cost well over $1,000 and they should last the average golfer anywhere between 8 and 12 years. One of the things you can do to keep them operating efficiently to change the grip yourself.
Step 1
Take a sharp utility knife and make four cuts down the length of the existing golf grip. Take hold of the cut pieces on the grip and pull it off so the shaft is bare. Pop off the cap at the top of the grip by applying pressure with your thumbs. Twist the grip stop so it slides down to the bottom of the shaft.
Step 2
Clean off the grip with a wet wash cloth to get rid of all the dirt and old glue from the surface of the shaft. There will be some glue that remains on the surface, and you will be able to get rid of it with grip solvent. Take the dry wash cloth and rub it on the surface of the shaft to make sure you have a smooth dry surface to work with.
Step 3
Take double-sided grip tape and wrap it around the top of the shaft in a diagonal fashion. Take the grip tape down to about 10 inches down the shaft. Knead it with your fingers so it is flat against the surface of the shaft.
Step 4
Slide the grip over the top of the shaft. Press it down into place so it snug against the shaft. Press the grip cap back into the top of the club. Lift up the grip stop and put it firmly in place.
Step 5
Let the club sit for at least an hour before you use it on the course or the driving range. The glue in the grip tape should cure quickly, but letting it sit for an hour will make sure that it is fully secure.
Tips and Warnings
- Change your grips every 12 to 18 months.
Things You'll Need
- Utility knife
- Double-sided grip tape
- Grip solvent
- Golf Grip
- Wet washcloth
- Dry washcloth
Member Comments