A recumbent trike is a type of adult tricycle, where the rider sits low to the ground in a semi-reclined position. The trike handles are positioned at the sides of the rider, and the pedals are attached to a post that is in front of the seat. A style of recumbent trike known as the tadpole has the two wheels in front, while a delta trike has the two wheels in back. Recumbent trikes are adjustable to help accommodate different-sized riders. Exact methods of adjustment may vary slightly from one model of trike to the next.
Step 1
Loosen the bolts on the handlebar assembly on the left side handlebar. Turn counterclockwise with an Allen wrench or tool specific to your model.
Step 2
Slide the bar up or down the supporting arm to adjust to the size of the next rider. Tighten the bar in the new position by turning the bolts clockwise, then repeat with the right handlebar.
Step 3
Remove the handlebars and switch sides with them to create a downward handle slope, if your model has that feature. Some riders prefer a different hand position if it is available.
Step 4
Remove the bolt or pin from under the seat by turning counterclockwise or removing the locking clip. Slide the seat along the bar to the desired position, then reinsert the pin of tighten the bolt.
Step 5
Loosen bolts behind the back of the seat to adjust the reclining angle of the seat. Move it to a spot that the rider is comfortable but can still reach the handlebars and pedals.
Step 6
Remove the screws or bolts from the bars that hold the neck rest in place, if your trike has one. Move the neck rest up or down to suit your comfort, then tighten the screws again.
Step 7
Measure from one tire rim to the other at the front of the two tires, then again at the back of the tires using a standard measuring tape. The distance at the rear of the tires should be no more than 1/16 inch more than the front for optimum performance.
Things You'll Need
- Adjustable wrench
- Allen wrench
- Measuring tape
Member Comments