zig
0

Notifications

  • You're all caught up!

Instructions for Bell Bicycle Trunk Racks

by
author image Janet Renee
Janet Renee began writing about health and nutrition after receiving a Bachelor of Science in dietetics, food and nutrition from the University of California, Berkeley. She went on to earn her Master of Science in nutrition from the University of Chicago. Renee has worked as a nutrition specialist and dietitian since 2000, focusing on metabolic and hormonal balancing.
Instructions for Bell Bicycle Trunk Racks
A pair of bicycles in a rack on the back of a car. Photo Credit strixcode/iStock/Getty Images

Cycling is a great outdoor activity that provides good cardiovascular exercise. Investing in a bike rack is a great way to transport your bike. Bell manufacturers bike racks that are easy to mount to your car trunk, and you can store a Bell rack in your trunk when you're not using it. With some instruction, you should be able to install the Bell bike rack in as little as five minutes.

Unfold and Position

Remove the bike rack from the packaging and unfold the rack by pulling the two tubes apart, like you would with the legs of a folding chair. You'll see a Bell logo on one side of the rack. Turn the rack so that the Bell logo is facing up. If you're holding it in the proper position, the two tubes will be at the bottom of the rack.

Connect Upper Straps

Locate the two straps marked "upper." These are the first straps you need to connect to your car's trunk. Position the rack so that the two tubes are facing away from the car and the Bell logo is facing up. Rest the rack toward the edge of the trunk and grab the two "upper" straps. Hook the straps into the hinge of your trunk and then pull the adjuster to tighten the straps.

You Might Also Like

Attach Lower and Side Straps

Locate the four remaining straps. Two are marked "lower" and two are marked "side." Attach the left-lower strap to the bottom of your trunk on the left side and the "side" strap to the left side of your trunk. Repeat this process for the right section of your trunk, securing the corresponding straps. Once in position, pull the adjuster to tighten the straps so that they are securely attached.

Mount Your Bike

Check that all of the straps are tight. Then, you're ready to mount your bike. Unfasten the Velcro straps at the top of the rack, lift your bike up and rest it on the bike rack. Secure the Velcro straps around the frame of your bike. After mounting the bike, double check that the straps are still secure. The added weight of the bike may slightly loosen the straps. If you're going on a long trip, it's a good idea to check the straps each time you stop for gas.

Related Searches

LiveStrong Calorie Tracker
THE LIVESTRONG.COM MyPlate Nutrition, Workouts & Tips
GOAL
  • Gain 2 pounds per week
  • Gain 1.5 pounds per week
  • Gain 1 pound per week
  • Gain 0.5 pound per week
  • Maintain my current weight
  • Lose 0.5 pound per week
  • Lose 1 pound per week
  • Lose 1.5 pounds per week
  • Lose 2 pounds per week
GENDER
  • Female
  • Male
lbs.
ft. in.

References

Demand Media