The seat of the BMX bike often features padded construction for added comfort and protection. According to "Ride BMX" magazine, most BMX bike frames feature a built-in seat post clamp. Top-of-the-line BMX models have been equipped with a quick-release lever for easy seat adjustments. Avoid painful injuries by checking the tightness of your seat post clamp before each ride. To tighten a conventional seat post clamp, you will need to use a standard BMX tool.
Conventional Clamp
Step 1
Push or pull on the BMX seat to make any necessary height alterations.
Step 2
Insert the head of a properly sized Allen key into the bolt of the seat post clamp.
Step 3
Rotate the Allen key in a clockwise direction to tighten the clamp and fasten the seat post in place.
Quick-Release Clamp
Step 1
Hold onto the saddle while pulling the quick-release lever away from the seat post.
Step 2
Push down or pull up on the seat to make any necessary height adjustments.
Step 3
Push the lever toward the seat post to tighten the clamp of the BMX frame.
Things You'll Need
- Allen key
Member Comments