The fiberglass snowboard deck is equipped with a series of threaded mounting holes that allow you to easily adjust the position of the snowboard bindings. While some riders prefer a setback stance for gliding through powder, others opt for a forward stance for enhanced speed capabilities. The recommended binding position for beginners offers increased balance during turns and maneuvers.
Binding Position
A centered stance is recommended for beginners because it allows you to easily transfer your weight between the opposing edges of the snowboard. To ensure a balanced stance, you'll need to install your bindings on the center-most mounting holes of the snowboard deck. Most snowboards feature a small display that indicates which four screws are in the centered position. The outdoor experts at REI recommend the centered binding position for beginners because it provides the rider with a feeling of control.
Binding Angle
While some snowboarders prefer to place their bindings perpendicular to the edge of the snowboard, this is not the ideal position for beginners. Bindings set at a 90-degree angle make it difficult to transfer your weight during high-speed maneuvers. Snowboarding-Essentials recommends positioning your front binding at a 21-degree angle and your back binding at a 9-degree angle. This binding position will keep your toes pointed toward the front of the board, which provides increased stability during hairpin turns.
Stance Width
The position of your bindings will determine your stance width. Choosing the appropriate stance width is an essential part of the learning process. When riding a snowboard that features bindings in the centered position, your feet should be about shoulder-width apart. This stance width is recommended for beginners because it allows you to keep your knees bent while navigating your board down the mountain slope. Install your bindings closer together if you have difficulty maintaining a comfortable riding stance.
Forward Lean
Positioning your bindings to the appropriate amount of forward lean will allow you to connect your heel- and toe-side carves with ease. The forward lean refers to the angle of the binding's vertical highback plates. Too much forward lean will cause you to focus the majority of your body weight on the toe edge of the snowboard. Use the dial on the back of the binding chassis to adjust the forward lean. A moderate amount of forward lean is recommended because it will help to keep your knees bent.
Member Comments