The Evenflo Baby Suite is a child care product designed to help parents keep their baby comfortable while traveling. The Baby Suite consists of three main components: a play area, bassinet and changing station. The bassinet and changing station attach to the play area when needed and each component is designed to fold up when not in use. Caster wheels attached to the underside of the play area allow a parent to easily move the child from one location to another.
Video of the Day
Turn the bundled play area upside down. Slide the two wheel assemblies onto the legs with slotted ends. Slide the two feet onto the legs with tabbed ends.
Return the play area to an upright position and pull apart the three Velcro tabs on the side of the bundle. Remove the mattress pad from the bundle, then pull the play area apart until it begins to unfold.
Grip the play area's long top rails and pull them upwards until you feel them snap into place. Repeat with the short top rails.
Reach into the play area and push down on the base until you feel it snap into place.
Place the mattress pad into the play area with the cushioned side facing upwards; flatten the pad down onto the base.
Push down the corners and center of the pad to secure them to the Velcro strips.
Slide the two straight tubes into the sleeves attached to the bassinet. Push the ends of the sleeves together until the Velcro interior clasps securely.
Assemble both of the side tubes by inserting the tabbed section of one tube into the slotted section of another.
Insert the end of the tubes into the sleeves attached to the side of the bassinet. Push the tubes all the way through the sleeves.
Lift the bassinet and place it over the play area. Fit the ends of the side tubes into the slots on the corners of the play area; push down on each end until you feel it snap into place.
Slide the end tubes into the sleeves on the ends of the bassinet. Push the ends of the end tubes into the slots on the corners of the play area.
Place the mattress pad into the bassinet. Push down on the pad until the Velcro patches clasp securely to the base of the bassinet.
Pass two straight tubes into the sleeves on the sides of the changing station. Push the ends of the tubes into the elbow connectors attached to the station.
Slide the long tube with the elbow connectors into the sleeve on the front end of the changing station. Fit the connectors onto the remaining ends of the two straight tubes.
Lift the changing station over the play area and lower it into place.
Affix plastic clips to both of the play area's long rails and one of the short rails.
Loop the changing station's straps through the D-rings; pull the straps tight and press them closed until the Velcro clasps together.