How to Use a Tegaderm

Tegaderm is a dressing material manufactured by 3M. It can be used to cover surgical wounds, minor burns and injuries, IV sites and central lines. Tegaderm dressings provide a waterproof barrier, yet they still allow oxygen to penetrate for better wound healing and skin health. Tegaderm is available in many sizes and may also be cut for a customized fit.

Close-up of a nurse at work with latex gloves on as she works a bandage preparation. (Image: bojan fatur/iStock/Getty Images)

Step 1

Cleanse the wound thoroughly with a product such as rubbing alcohol, betadine or chlorhexidine. Use disposable cotton swabs, preferably sterile. Saturate the swab with the cleaning solution and start in the center of the wound, working outward in a circular manner to prevent recontamination. Depending on the type of wound, a physician may recommend a different method of cleaning. Always follow physician recommendations for wound care.

Step 2

Allow the wound to air dry completely after cleansing. Do not blow on the wound to speed the drying process, as it will introduce bacteria from the mouth into the wound, which could cause an infection. The wound must be completely dry for the Tegaderm to stick.

Step 3

Determine how much Tegaderm you'll need to adequately cover the wound. Choosing a piece too small will prevent the dressing from adhering properly. A piece that's too large will increase pain when the dressing is removed because of the surface area it covers. The manufacturer recommends leaving 4 to 5 cm around borders of the wound for proper adhesion. Cut the Tegaderm to fit if necessary.

Step 4

Remove the paper backing from the Tegaderm piece to expose the adhesive side. A paper frame will remain around the edges of the Tegaderm, allowing for easier holding and application to the wound site. Do not remove this frame until after the Tegaderm is applied to the wound.

Step 5

Place the Tegaderm piece over the wound site, with the wound in the center. Press gently to ensure that the Tegaderm sticks well. Smooth out any bubbles or creases.

Step 6

Remove the paper frame that surrounds the Tegaderm by gently peeling one end and following it all the way around the dressing. Smooth down the edges as the frame is removed to adhere the dressing to the skin.

Things You'll Need

  • Tegaderm dressing

  • Cleanser

  • Scissors

Tip

Always wash hands thoroughly before beginning any dressing change, and dry with a disposable paper towel.

Replace the Tegaderm dressing at least once every seven days.

Warning

Tegaderm should not be used on infected wounds.

While the adhesive is considered hypoallergenic, some patients may develop sensitivity to the product, especially with repeated use. If redness or irritation occurs underneath the bandage, the Tegaderm piece should be removed and another type of dressing applied.

REFERENCES & RESOURCES
Load comments
PARTNER & LICENSEE OF THE LIVESTRONG FOUNDATION

Copyright © 2019 Leaf Group Ltd. Use of this web site constitutes acceptance of the LIVESTRONG.COM Terms of Use , Privacy Policy and Copyright Policy . The material appearing on LIVESTRONG.COM is for educational use only. It should not be used as a substitute for professional medical advice, diagnosis or treatment. LIVESTRONG is a registered trademark of the LIVESTRONG Foundation. The LIVESTRONG Foundation and LIVESTRONG.COM do not endorse any of the products or services that are advertised on the web site. Moreover, we do not select every advertiser or advertisement that appears on the web site-many of the advertisements are served by third party advertising companies.